Kontak

4"

Endless Round Lifting Sling 4′ 6′ 8′ Crane Rigging Hoist Wrecker Recovery Strap

/

About Us We are dedicated to providing you a fast, secure and cost effective method of buying your flatbed trucking supplies. We stock a wide variety of farming supplies at prices that just cannot be beaten. Your satisfaction is 100% guaranteed. Hundreds of truckers are saving money with Mytee Products, so why not you too. Shipping and Delivery All in stock orders placed before 12pm EST are usually shipped the same day. Delivery times can be estimated by the following chart (this is an estimate provided by the carrier). Please call us if you need delivery guarantee service. 30 Day Money Back Guarantee If you are not satisfied with your order, please return the entire order within 30 days of receipt for a refund. Unfortunately, we cannot refund your original shipping charges unless there was a Mytee Products error involved, such as wrong item shipped. Returned goods must be in like-new condition and in the original packaging. 15% Restocking fees applicable. Please inspect all items immediately upon receipt. If you believe there was any damage during transit, any missing or incorrect items, please report it within 1 Business Day of receipt. We cannot accept late reports of products damaged within transit. Please contact us via Ebay for return instructions. Customer Responsibility Products will experience normal wear and tear from usage. Normal wear and tear cannot be a basis for claim submission. Please remember that the D-Rings and grommets on your tarps are not rust proof. We do not represent as much. As such, the onus is on the driver to dry them before rolling up the tarp. Once the D-Rings rust, they become rough like sandpaper and cut through the webbing loops that hold them in place. As such, rusting should be prevented by the customer. The fabric is not designed to take any direct abrasion or pressure. All tarp fabrics (except Mesh) are designed to be water resistant, not 100% water proof. On all fabrics, cuts and rips on the main body should be guarded with proper edge protectors and moving blankets by the customer. In case of Shade Mesh, the mesh is designed to provide shade from a distance. Mytee is unable to support any claims due to fabric rips and cuts. The webbing that holds the D-Rings are designed to take limited tension from Bungees. However, if undue force is applied to force-fit a tarp over a load for which the tarp was not designed, the webbing will rip off the main fabric. Products should be inspected immediately upon receipt. Only damages reported within 3 business days of product receipt by customer will be reviewed for transit damage. Please understand that we get a wide variety of customers. The only thing we can do is observe clear policies and manage them consistently. That is the only way we can keep costs down for all customers. Guarantee Products contain our brand markings. If product is materially different from how it was advertised, a claim can be submitted to Mytee Products. Supporting claims that are not exempted from specific rules outlined and are directly attributable, based on Mytee’s sole judgment, to manufacturing defects, do qualify for claims.

Heat Shrink Tube – 4:1 ratio Dual Wall Adhesive Glue Marine lot HeatShrinkBuddy

/

Premium-Quality Dual-Wall Polyolefin Heat Shrinkable TubingWall Type: DUAL-WALL (Inner wall of “hot melt adhesive” to encapsulate and protect your wires!)Sized by: ID (Inner Diameter)Shrink Ratio: 4 to 1- This premium tubing has an inner wall of adhesive/glue which melts when heated to encapsulate your wire and protect it from the elementsUncut tubing or longer lengths are almost always available upon request! Just contact us!When choosing sizes, make sure you are thinking in terms of DIAMETER. Diameter is the measure of a round object, not flat. Larger sizes may be flat prior to usage, but they are still ALWAYS sized by ID (inner diameter). Refer to the chart/diagram in the additional photos for further reference!SUMMARY:Made of premium cross-linked polyolefin, a robust and versatile material with excellent properties and durability4 to 1 shrink ratio; will shrink to ONE QUARTER of the nominal (named) diameter. For example, the 1 inch ID tube shrinks to an inner diameter of 1/4″The named diameter is the size BEFORE shrinking. The diameter will shrink to ONE FOURTH of the named size.Dual-wall adhesive-lined; when heated, the inner glue-lining will melt and seal your wires to protect themIf you dont need the “hot melt adhesive” then you can buy single-wall tubing for a much cheaper price. I posted links to single-wall tubing above 👆The tubing is sized by ID (inner diameter). Diameter is the measure of a ROUND shape, not flat.COSMETICS: The tubing has a quality matte finish, not a cheap slick/shiny appearance like PVC tubes! There is no text printed on ANY of this tubing!RECOMMENDED EQUIPMENT:”Heat gun”, “task oven”, or “tubing torch” to shrink the tubing at 90°C ~ 110°CelsiusDo not overheat the tubing, you can compromise it! Do not use tubing which has been overheated!Work in a non-flammable and well-ventilated workspaceAlways use safety gloves, protective eyewear, and a respiratory mask when heating materialsSAFETY/TIPS:Do not perform repairs of electrical/electronic components unless you are a qualified, experienced, and knowledgeable professional. Performing repairs can be very dangerous. Dont do something stupid! Seek professional assistance/advice!The tubing, adhesive, and items you are working with can get very hot! Be careful not to burn yourself – avoid touching heated objects/materials!Heat-resistant gloves, protective eyewear, and respiratory mask are all recommended. Work in a well-ventilated area and non-flammable workspace. Clear your surroundings to avoid accidents! This includes children and pets!Read and obey all safety instructions for operation of the heat source you choose to utilize when heating the tubing. “Heat guns” or specialized “task ovens” are recommended. Do not exceed 110 degrees Celsius when shrinking the tubing to avoid burning/degrading the tubing! Hair driers do not get hot enough to shrink most tubes, however they may be useful for tiny sizes. Torch/flame is not recommended as you may burn/damage the tubing.While heated, the tubing is in a softened state until it cools, and thus may be easily damaged. Avoid stretching the tubing until it cools and firms up. USAGE INSTRUCTIONS:Read safety guidelinesPrepare equipment and work areaSlide tubing over wireApply heat to tubing to reach 90°C to 110°CelsiusAllow tubing and wire to coolHANDY TIP:The tubing is sized by ID (inner diameter). If you only know the flat width of the tube size you need (measuring across a flattened tube), but arent sure what ID you should choose, you can quickly approximate diameter by dividing by 1.6! For example: If you need a tube that is 3 inches wide when flattened, you would divide 3″ by 1.6, which equals 1.875″. That means you should order the 2″ ID tube

4-Pack Hotel Pans Commercial Steam Table Pan w/ Lid Stainless Steel Food Pan US

/

Features & Details (1) Made of the durable, dent and rust-resistant stainless steel material, built to last through heavy commercial use. The hotel pan using polished mirror design looks high-grade and dedicate. (2) Overall Size: 20x 12 x 4 inch. With the large capacity, easy handle the busy kitchens and high-volume buffet service and catering. The steam table pans can be used for family gatherings or outdoor cooking. (3) Easily holds your favorite hot and cold foods. The full size hotel pan can heat food evenly; withstands temperatures of up to 500 Fahrenheit. The anti-jam steam table pan is a superior fit, and heating efficiency extends holding times.

Scroll to Top