Phillips PAN HEAD – Dosen Online

#4-40 Phillips Pan Head Machine Screws, Steel w/ Black Oxide Coarse SAE US Inch

/ 07/07/2026

#4-40 Phillips Pan Head Machine Screws. These are made from Carbon Steel with Black Oxide and Oil. Available in 1/8″ to 1″ lengthsPackage quantities available in either 10, 25, 50 and 100 pieces. Diameter : #4Thread Pitch : 40 TPI – UNC / Coarse ThreadDrive : #1 PhillipsType : Pan Head Machine ScrewMatching Nut : #4-40 Available here System of Measurement : InchMaterial : Steel w/ Black Oxide CoatingSpecifications : ASME B18.6.3-2010 & SAE J82Tensile Strength : 60,000 psi min.Hardness : Rockwell B70-B1002 Available Lengths #4-40 x 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″, 7/8″, 1″

#10-32 – Phillips Pan Head Machine Screws – Steel w/ Black Oxide SAE Fine Inch

This listing is for new steel #10-32 Phillips PAN HEAD Machine Screws with a Black Oxide and Oil finish. Diameter : #10 / 3/16″Thread Pitch : 32 TPI – UNC / Fine ThreadLength : See Diagram to RightDrive : #2 PhillipsType : Pan Head Machine ScrewMatching Nut & Washers : #10-32 Available here System of Measurement : Inch (US) / SAEMaterial : Steel w/ Black Oxide CoatingSpecifications : ASME B18.6.3-2010 & SAE J82Tensile Strength : 60,000 psi min.Hardness : Rockwell B70-B1002 Available Lengths #10-32 x 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″, 7/8″, 1″, 1-1/4″